- Product Info
Please check below short video for our HPC199 AI vehicle counting system.
I. General Introduction
HPC199 AI vehicle counting system has a built-in AI processing chip, which can independently complete target identification, tracking, counting and control locally. It can be used in traffic statistics, regional management, overload control, anti-tailing control and other scenarios. At the same time, it can be connected with the brand DVR hard disk video recorder, providing a multi-functional and multi-purpose counting product with HD video monitoring function. It can be used alone or online, and it can be used for commercial retail industry, tourism, park and other managers to provide decision-making passenger flow data support, can provide intelligent security control solutions for banks, road traffic and other industries.
The HPC199 AI vehicle counter integrates the function of vehicle flow statistics, which is not affected by the visual angle. The maximum field of view coverage can reach 20 meters, and the number of targets can be tracked at the same time. According to the user-defined area and target counting direction, the passenger flow statistics of vehicles can be carried out respectively. Only one HPC199 AI vehicle counter can realize the separate statistics of vehicles in and out.
The HPC199 AI vehicle counting system adopts IP65 waterproof design, which can carry out the same precision statistics even when it is used outdoors. HPC199 AI vehicle counter can be installed at any angle, and the probability of being affected by backlight, backlight or sunlight is extremely low. It can automatically filter the shadow influence of the target. The image sensor with high sensitivity can work normally even if there is weak ambient light at night. When HPC199 AI vehicle counter is unable to accurately identify the target in a specific angle, the recognition rate can be improved by target learning training and increasing target samples.
1. Built-in AI processing chip
2. Target identification, tracking, counting and control locally
3. IP65 waterproof design, for outdoor usage.
4. Any angle installation
5. Less affected by strong sunlight or weak ambient light.
6. API/ Protocol available
7. Detection distance: 5-50 meters
8. Supports learning and calibration of specific targets
9. Up to 4 different areas can be sent
III. Product Composition:
HPC199 AI counter
2. Standard Lens
Please check the focal length of the standard lens. The lenses are divided into 5 mm, 8 mm, 16 mm and 25 mm to determine whether they are consistent with the purchase requirements.
3. Tail line definition
RS485 socket is with LED indicator, and through the indicator to determine whether the network cable connection is normal.
Power supply mode
DC12V power Adapter
Binuclear ARM cortex A53 1.5GHz 32KBI-cache
SONY IMX, 1/1.8” Progressive Scan CMOS
0.1 Lux (Streetlight environment at night)
Main stream 3840×2160 Sub stream 1280×720
H265 / H264 / MJPEG
Onvif / http / modbus / RS485
Vehicle attribute classification
Bus / truck / car / motorcycle (tricycle) / bicycle
Web software management
Network port, 485 port
45 ～95 %
The HPC199 AI vehicle Counter is installed in pole or wall mode. The installation height and shooting angle can be determined according to the actual situation of the scene. It is appropriate that the front vehicle does not block the rear vehicle. When the HPC199 AI Vehicle counter is used to photograph the side of the vehicle, it can obtain relatively ideal vehicle type recognition accuracy.
Ideal installation angle and position
When the side of the vehicle cannot be photographed due to the installation height, distance from the vehicle and the camera blind area, it can also identify the vehicle better by using the angle of oblique front. HPC199 AI Vehicle counter is not recommended to be installed in front of the vehicle for shooting, which is easy to cause deviation for vehicle type identification. Please refer to the following figure for details:
VI. Adjustment and Software
The built-in web page of HPC199 AI Vehicle counter can view the real-time dynamic picture and vehicle recognition effect, and adjust the installation angle or installation position according to the recognition effect. The HPC199 AI Vehicle counter is equipped with a 3M long cross type network cable, which can directly connect the notebook computer and the HPC199 AI Vehicle counter. After the IP address of the notebook computer network card is set to 192.168.1.100 and the subnet mask is 255.255.255.0, it is recommended to use Google Chrome browser to access the built-in web page of HPC199 AI Vehicle counter http://192.168.1.188 , Password AI998800
The home page can dynamically display real-time vehicle identification screen and model information.
Detection area setting:
A region is defined for the statistics of vehicle driving direction. The area cannot be set too small. Generally, the length of a car can be accommodated according to the driving direction of the lane. After setting the area, the statistical direction of lane can be defined. The arrow direction is "out", and the opposite direction is "in".
We have a full range of counters available：IR counter /2D camera counter /3D camera counter /Occupancy Control system /Passenger counter/ Vehicle counter..etc
if you are interested, please click the below link to get more.
- Tel: +86-21-52353905
- Fax: +86-21-52353906
- Email: email@example.com
- Address: Room 803, Building 1, Prona Business Plaza, No. 2145 Jinshajiang Road, Putuo District, Shanghai, China