Other Languages

  • HPC009 3D camera people counter

HPC009 3D camera people counter

  • Product Info

Please check below short video for our HPC009 3D camera people counter with built-in relay.

General Introduction of 3D camera people counter 

HPC009 3D camera counter is widely applied in supermarkets, chain stores, parks,and other public places. It possesses high-performance communication media processor with Hisilicon(Huawei Chip) video purpose hardware acceleration engine. Adopted with main development dual-camera depth algorithm model, it conducts dynamic detection on cross-section, height and movement trajectory of the human target, and in turn, obtains comparatively high-precision real-time people flow data, providing RS45 or RS485 interface to conduct data interaction and sharing with third-party equipment, which is very convenient for data depth development.

 

HPC009 3D camera counter depth camera can be adjusted from 0-180 degrees, to meet different environment installation requirements. The built-in wiring method enables perfect integration of HPC009 counter and environments.

3D camera people counter advantages:
 1. Built-in image anti-shake algorithm, strong environment adaptability.
2. Algorithm correction function, adaptive lens angle, focus information, allowing a certain angle tilt with the horizontal direction;
3. Counting accuracy is not affected by human body form, clothing color, hair color, hat and scarf, etc.
4. Counting accuracy is not affected by human passing side by side, crossing passing, and blocking traffic;
5. Height limit can be set on target, human baggage error can be filtered;
6. With the status of the bus door switch as the trigger condition, it starts counting when door is opened, captures real time statistical data, and stops counting when door is closed;
7. Possess strong scalability and portability, can be installed according to the number of vehicle doors;
8. Unaffected by the season and weather, unaffected by figure shadows or shades, unaffected by external light, automatically activates infrared fill-in light at night to have the same recognition accuracy;
9. Easy to install, support 180°installation, strong environment adaptability.

3D camera people counting system specification:

Project

Equipment Parameters

Performance Indicators

Power supply

DC12~36V 

Voltage fluctuations of 15% allowed

Power consumption

3.6W

Average power consumption

System

Operating Language

Chinese/English/Spanish

Operation interface

C/S operation configuration mode

Accuracy rate

95%

External interface

RS485 interface

Custom baud rate and ID, multimachine network supported

RS232 interface

Custom baud rate

RJ45

Device debugging, http protocol transmission

Video output

PAL, NTSC system

Operating temperature

-35℃~70℃

In well ventilated environment

Storage temperature

-40~85℃

In well ventilated environment

Average failure-free time

MTBF

More than 5,000 hours

Installation height

1.9~2.2m

Environment illuminance

0.001 lux (dark environment) ~ 100klux (outdoor direct sunlight), no fill-in light needed, accuracy rate not affected by environment illumination.

Earthquake resistance level

Meets national standard QC/T 413 "Basic technical conditions for automotive electrical equipment"

Electromagnetic compatibility

Meets national standard QC/T 413 "Basic technical conditions for automotive electrical equipment"

Radiation protection

Meets EN 62471: 2008 “Photo-biological safety of lamps and lamp systems”

Degree of protection

Meets IP43 (completely dust-proof, anti-waterjet intrusion)

Heat dissipation

Passive structural heat dissipation

Size

178mm*65mm*58mm

 

Adjustment Software 

Customize network parameters and server address

Customize target counting area and target moving direction

HPC009 3D camera people counter provides rich data interface:

1. RJ45 network interface

Via RJ45 interface andHPC009counter connection, client tool program views or sets working status and operates parameters. At the same time, HPC009 counter submits passenger flow data to the designated server in real time through RJ45 network interface.

2. Composite video output interface

Can be connected with vehicle-mounted display to visually display passenger counting results. Can also be connected with vehicle-mounted video recorder to save the passengers dynamic video of getting-on and getting-off in real time.

3. RS485 interface or RS232 interface

Provides one-way RS485 or RS232 for third-party equipment to conduct data calls, customizes baud rate and communication ID code.

 

Below photo is our people flow control system with our HPC009 3D counter:



ONLINE INQUIRY

Contact Us

  • Tel: +86-21-52353905
  • Fax: +86-21-52353906
  • Email: hy@peoplecounter.cn
  • Address: Room 803, Building 1, Prona Business Plaza, No. 2145 Jinshajiang Road, Putuo District, Shanghai, China